| 1. | Subsequent packets for that destination are sent by the same switching path
后续的包通过同样的交换路径发送到目的地。 |
| 2. | Subsequent packets for the same destination use the same switching path
后续的包会使用同样的交换路径到达相同的目的地！ |
| 3. | The remaining packets will go through the fast - switched path if a cache entry exists
如果快取项目存在时，剩馀的封包将会沿著快速交换的路径来传递。 |
| 4. | Switching path delays are introduced because of the translation of each ip address within the packet headers
因为针对每一个封包标头的ip地址进行转换，所以会带来一些交换路径的延迟。 |
| 5. | When a set of mpls nodes have information in their libs related to the same destination , a label switched path ( lsp ) has been created
当一组mpls节点在它们的lib中拥有了与同一目的地有关的信息时，就建立起一个标签交换通道（ lsp ） 。 |
| 6. | The most important advantage that mpls can supply in the research on traffic engineering is that it can route ip packets to an lsp ( label switched paths )
在流量工程的研究中， mpls所提供的最大的优点是能够将ip分组路由到一条标签交换路径lsp ( labelswitchedpaths )上。 |
| 7. | The consistent theme for these techniques is that communication between endsystems on separate subnets initially flows through the routers , with subsequent traffic " shortcut " to the faster switched path
这些技术的一致想法是，不同子网上端站之间的通信先通过路由器，尔后的流量“抄捷径”到更快的交换通道上。 |
| 8. | With the constraint of subcarrier switching path , a subcarrier label assignment strategy in satellite subcarrier switching networks was proposed for unsymmetrical transmission
摘要分析了卫星通信副载波标记交换网络中网络对动态业务条件下非对称业务传输的适应问题，提出了一种副载波标记划分策略与资源分配算法。 |
| 9. | Based on the mfc ( multicast forwarding cache ) formed by multicast protocol such as dvmrp ( distance vector multicast routing protocol ) , pim ( protocol independent multicast ) , we can build special lsp ( lable switch path ) for certain source group couple to transport multicast data flow using ldp ( lable distribute protocol ) or cr - ldp . based on the zxb10 switching router of zte co . we can now support dvmrp within the context of mpls networks
本文主要研究mpls网络对ip组播业务的支持，根据现有的ip组播协议如dvmrp 、 pim等所生成的组播转发表(转发树) ，利用mpls网络的ldp (标记分发协议) cr - ldp (显式路由标记分发协议)为特定的源组对确立lsp (标记交换路径) 。 |
| 10. | According to the mentioned theories and its specifications from national standards , mcp ( management and control processor ) software is designed in this paper , which based on former version running on available optical node devices , such as mstp and oadm / oxc . it can perform the basic functions defined in ason control panel . it adds the route , signaling and lmp basic function modules to complete building , deleting or refreshing the sc ’ s ( switched connect ) lsp ( label switch path )
本设计在嵌入式实时多任务操作系统( rtos )基础上对现有的光网络节点设备( mstp和oadm / oxc设备)的网元管理控制器( mcp )的软件进行扩展,增加路由、信令和链路资源管理等功能模块,实现了ason控制平面的基本功能,及波长路由光网络中交换式连接的波长lsp的建立、删除和维护等操作。 |
